Tired of your old worn-out kitchen cabinetry? Or maybe the painting has faded over time and doesn’t give your entire kitchen a beautiful finish? Maybe just want to bathe in the beauty of a transformed kitchen? 

You have two options for upgrading your kitchen landscape:

1. Painting your kitchen cabinets or

2. Replacing your kitchen cabinets

But before you go right ahead to give up on your kitchen cabinets by replacing them, it’s wise you know the benefits of cabinets painting. You’d be glad you kept that thought for a few and instead opt for refinishing, and here is why:

Painting kitchen cabinets vs. kitchen cabinets replacing – Benefits of refinishing your kitchen cabinets

1. it’s cheaper than installing new cabinets

The cost of replacing kitchen cabinets is relatively higher compared to refinishing. The expensive costs arise due to the high cost of getting the cabinets themselves, the accompanying materials for setting them up, amongst others. 

2. Helps prevent waste

Replacing your cabinetry means disposing of the old one. This ultimately leads to an increase in hazardous waste harmful to the environment. Seeing that our world is gradually degenerating and sustainable living is the new order of the day, recycling by constantly repainting and reusing is a more eco-friendly option. 

3. Replacements take longer

If you do not mind staying out of your kitchen and cooking your meals in a makeshift cooking space, then you can opt for replacing. If not, stick to refinishing, which is less time consuming than replacing and will get you back to your favorite part of the house(if it is) sooner than you expect. 

4. Extends the life span of cabinets in good structural condition

It’s unwise to just rip cabinets that are in good condition merely for being old and worn out. If your hardware is still in good shape but just needs a makeover, going through the refinishing process will give you your desired kitchen. 

How to refinish your kitchen cabinets 

Here are a few things you should know should you decide to embark on the job of cabinets painting:

· It takes about 4-8 weekends (an equivalent of 30-160 hours) to get the work done. 

· Chemicals are involved, which means a high level of safety protocols when using chemicals.

· It’s easy to purchase inferior materials for the job, especially if you have no basic knowledge of carpentry.

· It takes a lot of hard work, patience, and commitment due to the manpower needed for a perfect finish.

· The larger your kitchen, the more tedious and time-consuming it gets. 

However, for a standard high-quality job, it is best you leave your cabinets refinishing to professional and expert services committed to giving the best cabinets refinishing in Miami. This is because, as a non-professional, you can only do so much. In a short period, your beginner-like cabinet painting job may come undone – professionals with cabinets refinishing in Miami experience will ensure that a refinishing job extends the life of your cabinets’ finishes. 

Now to the process involved: 

1. Gather your refinishing supplies

Knowing the right supplies for each stage of the refinishing process and gathering these supplies will make your work easier and less time-consuming. It’s very easy to grapple with specific supplies and their uses if you do not sort them out before refinishing. To prevent such confusion, get the right supplies ready, starting from your protective gear. 

2. Empty out your cabinets and disassemble them

except you’re an outright magician, remodeling your cabinets without clearing the clutter and taking out everything they house is like trying to pass a cow through the eye of a needle. So what do you do? Take out the cabinets’ contents and clear the surfaces of kitchen knickknacks and properly place them in some other location. (If they are all dusty and grimy, this will be the best time to give them a good wash). 

After getting rid of clusters and whatnot, you should disassemble your cabinetry by taking off the cabinets’ shelves and doors from their hinges and supports. In order not to mix up the positions of your cabinetry, you should label them (including the screws) for easy replacement after you’re done painting.

This is also the time when you cover your countertops, floors, and kitchen utensils in readiness for the next step. 

3. Clean the surfaces

Painting over leftover and dried in grease and food stains might reduce the quality of your remodeling job. So before you get down to the primary business of painting, you should thoroughly clean the surfaces of your cabinetry. You may decide to soak your hardware for a few minutes to lessen the tenacity of stubborn stains and then scrub lightly with a wood scrubbing pad or a soft brush. Once it is adequately dried, coat it with wood polish and allow it to dry again. 

4. It’s time to strip and sand

The stripping agent to apply will be based on the original finish of your hardware. If you want your wood to last longer and allow the paint to penetrate the wood deeper, then sanding is the important step you should not skip. 

5. Paint and reassemble your cabinetry

After sanding your cabinets to smoothen out rough surfaces and edges, you prime and paint the wood. Picking a paint color will depend on your taste, the look you’re going for, and its compatibility with the overall décor of your kitchen. After painting, leave the cabinets to dry properly and then piece them back together, following the labeling you made prior to the disassembling. 


It’s very beneficial to choose refinishing over replacing, but we all know that everything good has an end. It is against this backdrop that sometimes replacement might be the go-to when your cabinets start showing signs of wanting to take the final bow or a situation where you need to change the original layout of the kitchen. Other than these, cabinets refinishing and painting is the best option for revamping and remodeling your kitchen furniture. 

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>